Basic Tools for Refrigerator Repair

Today, refrigerators are present in every one of our homes and it’s really difficult to live without one. They are a great helping hand and prevent plenty of problems by allowing us to buy in bulk and store for later use.

However, they are machines and run on electricity and just as any other electrical appliance there are great chances that they would malfunction too. Therefore, if at all you want to repair your refrigerator you would need not just skill, but also the right equipment. Moreover, the work that you perform needs to be top notch and last for some time as you’re not going to want to keep repairing your fridge every other day kenmore refrigerator repair altadena.

Tools needed for refrigerator repair

Some of the most important and prominent tools that you’re going to need for refrigerator repair include:

A functioning thermometer

You first need to find out where the fault lies and in order to do this you would need a functioning thermometer. Basically you would need to check out the evaporator coil as well as the condensing unit.

Therefore, the thermometer is one of the best troubleshooting tools that you’d come across when it comes to refrigerator repair. Moreover, they’re not at all expensive and you would be able to buy them at really cheap rates. Some of them would be as low as $10.

You also need a multimeter

Multimeters are yet another important tool that you would need to use in order to help you repair your refrigerator. They’re basically devices that help read resistance offered, voltage as well as current flowing through a particular component of your fridge.

When buying a multimeter try and buy one that is compact and light as at times they can get very big and storing in your tool box would be an issue as they tend to be the size of your toolbox themselves.

A device to detect leaks

You would also need a device that functions as a leak detector as there are plenty of cases wherein the coolant of your refrigerator leaks. Whatever the form of leak, it would definitely prevent your refrigerator from functioning well.

There are plenty of different kinds of leak detectors available, but as far as possible try and buy one that you would be able to operate with a single hand as that’s going to be an issue otherwise.

Are You Expecting and Own a Maytag Neptune Front Loading Washer?

Congratulations! You’re having a baby soon… Before you know it your Maytag Neptune Front Load washer will be working overtime cleaning bibs, blankets, baby outfits, etc. so your washer uptime will be critical. There are some things you should know about your Neptune front load washer.

The most important thing to be aware is that the Maytag Neptunes with a timer knob (non digital) shipped with a faulty door latch wax motor. This small electrical device locks the door during the high speed spin cycle. What happens is that this faulty device eventually shorts out and damages the machine control board maytag washer repair pasadena.

The good news is that Maytag redesigned this device to correct the failure but you need to replace it before it fails to prevent the machine control board damage. After your machine fails it will not lock the door which means your clothes will be sopping wet at the completion of the wash cycle. More good news… The door latch wax motor is inexpensive and really easy to change. It can be done in 5 -10 minutes. There are videos available that show how to inspect wax motor and replace it.

Luckily, Maytag made it easy to tell which wax motor you have by the color of the actuator pin that sticks out of the device. If the pin color matches the body color then you have the faulty design. You want the wax motor with the black color pin which is the redesigned component. If you bother the repairman after this failure they will probably quote you $450 to fix your machine. I recommend that you proactively replace your door latch wax motor before it damages your machine control board.

The next thing to be aware of is your bearings. When you first put your Neptune in service you were probably impressed with how quiet the machine is… That is the way it is supposed to be. When your bearings start to fail the machine will get loud in the spin cycle. It will sound like a jet taking off when ramping up to 850 rpm. You should be concerned and not ignore it. You can replace your bearings yourself. If you bother the repairman they will want $900+ to replace your large plastic outer tub. But you don’t need to replace the expensive $450 tub… Just replace the bearings and seal. There is a special Neptune bearing tool kit available you can rent that includes an instructional DVD that shows you step-by-step how to disassemble your Neptune, replace bearings using tool, and install the new seal.

The sooner you replace your bearings once you notice the machine getting louder in spin cycle the better. I would even recommend that if your machine has made it to the 10 year mark that you replace the bearings proactively. The Neptune front loader is a workhorse but it does have some design issues you need to be aware of to keep it running efficiently for years to come.

Washing Machine Repair – Why DIY Repair is a Bad Idea

There are many people that think when things break, that they can fix them. In a lot of cases, this is completely possible. However, when it comes to finding something like washing machine repair services, you really do need to leave it to the professionals. Sure, you’ll have a lot of different questions that you’ll want to ask, and you’ll want to make sure that you find a good company to work with. However, it’s better to take the time to ask these questions and check out your options than to risk spending more in the long run by simply trying to do it yourself.

Washing machine repair can be a simple task ge washer repair pasadena, as long as you take the time to check out your options. There are so many different repair services out there, and all that you need to do is check them out to see what they can do for you. It doesn’t matter how much you need to save or how well you think that you can do the work. Take the time to realize that if you attempt washing machine repair on your own, it will likely cost you twice as much or more because you might run into problems. Taking care of things around your house is a pretty simple task, but there are some things that should always be left to the professionals.

Washing machine repair that isn’t done right can often create a lot of problems for you. For example, you could create a situation where your home floods or you are at risk for electrical fires or other hazards if the job isn’t done right either by yourself or an unqualified repair service. Make sure that you do whatever it takes to find a quality service in your area and get the right results the first time around.

You can find many different choices for all of your washing machine repair needs in Dublin and Kildare. Just consider the reputation of the companies that you consider, as well as what you’re getting for the money. Price should never be considered by itself, but it is something that needs to be relative to the services that you are getting. Keep these things in mind and finding washing machine repair near you should be much simpler than you might have thought. Using the best repair service can go a long way towards improving your chances of having a quick, easy, and painless washing machine repair experience!

Repair, Replace and Relax

Keeping on Top of Home Repairs

Our lives are busy, there just is no other way to look at it. And yet, we still have to keep up with repairs and replacements, don’t we? It’s a tough one to deal with and it is becoming increasingly more difficult to keep on top of the repairs and replacements that our homes need to remain functional, enjoyable and valuable in this real estate market. You would think with all the gadgets, technology and equipment we have these days that it would be easier, yet it somehow it is not. Not to mention, this economy has required many of us to cut back, trim our sails, so to speak, and evaluate how we spend our money lg dryer repair pasadena.

Here are some ideas to assist you in planning your repairs or replacements, the first of which is to look over your appliances and their functionality. In order to remain useful and viable, you need to be aware of the longevity of your appliances, so you can decide when to replace them. Quite often we replace appliances before their useful time is up, doing so during remodels, when we move into a house that is new to us, or when we want a change in design and decor. But you can save money by not replacing things that still have life and usefulness!

It’s possible that most of us do not know the longevity of our appliances and are being led to replace them by those who SELL and make a profit on the buying of a new appliance! To assist you, here are some very basic guidelines for expected life on your household appliances:

Dishwashers and Garbage Disposals – 5 to 12 years

Washers and Dryers 8 to 12 years

Refrigerators and Stoves – 15 to 20 years

I can hear you saying – but my dryer is older than that! Of course. These figures are just generalities based on the industry standards. Remember the expression planned obsolescence? That simply means that while manufacturers want you to have a useful and sturdy product, they want you to keep buying, so that the duration of the usefulness of your appliances is factored into the design and purchase price.

What are other factors that determine the length of time your appliances will “live?” Repair, upkeep and portability are just some of the keys to keeping appliances working and useful. If you move every couple of years, your washer and dryer, for example, may not last as long, for the jiggling and rough handling in the move certainly affects the condition of your appliances. If you do not take care of routine maintenance, such as keeping dryer vents clean and free of lint, or keeping your refrigerator coils, drain pans, water dispenser hoses and inside cleanliness up to date, then you can be sure of having to replace your appliances more often. In tough economic times, these issues can mean the savings of hundreds, if not thousands, of dollars.

The next key step to consider is to be aware of the items that are likely to need more frequent attention. Items such as gutters, patio covers, (particularly where they attach to your home,) plumbing, such as toilets and pipes, and routine maintenance of walls and floors which need scheduled maintenance. It is a never ending story of awareness, being in tune with the rhythm of your life, and how it affects your house! The best way to keep on top of these repairs, is to have a viable and up-to-date fix-it list.

If you find yourself constantly postponing tasks, hire someone, or follow a monthly list of to-dos so that your home gets the attention it needs and deserves, and you get the peace of mind and relaxation that you deserve!

Here are some ideas for July:

July can be a great month for painting – warm weather means windows can be open for quick drying and dispersion of any odors. Take a look at your driveway, does it need patching, repair or renovation? How about your garage? Take advantage of warm days to clean it out, get rid of junk, build shelving and toss toxic chemicals, checking, of course, with your local city or county for proper disposal methods. You are undoubtedly outside more often now, so take a good look at your fencing. Does it need repair? Do fence posts need replacement? Attention to each of the above mentioned items will increase the usefulness and life of your home, and increase it’s beauty and value.

Owning a home, or even renting one, brings with it a set of responsibilities, as well as a set of enjoyable features. As with marriage, children or pets, the tasks required are balanced by the enjoyment you get and the relaxation of knowing that you are aware of the needs, and attentive to them. You deserve a home environment that is relaxing, comforting and secure. Take the steps today to insure that your home gets the attention it deserves.

The Fix-It Professionals is a team of professionals working together to make your environment functional, beautiful and FIXED. The operations are run by a husband and wife team. John is the licensed electrician and fix-it guy and Joan is the Business Manager. Together they help busy, professional women fix their homes & offices, making their environments be exactly as they wish them to be.

Indoor Clothes Dryer – The Best Choice For You

There is probably not one person who is willing to admit that doing laundry is his/her favorite household chore. It consumes a lot of time, it is cumbersome, it is tiring, and you will probably never hear “gee, thanks for doing such a great job of getting my jeans clean.”

Simply put, we do it because we have to do it whirlpool dryer repair pasadena. Now the task is figuring out the best way for you to do it. In this day and age, there are still many people who cannot afford to purchase a new washer and dryer. So your option is to purchase a washer, or go to a laundromat to wash, then come home and use an indoor clothes dryer.

OK, so what’s the deal? We just admitted that we cannot afford a gas or electric clothes dryer. That doesn’t mean you cannot dry your clothes at home. Whether you live in an apartment, a mobile home, or a home with a basement, you can make it work.

1) There are retractable clothes lines that you can stretch across a basement if you have one, or wherever you have space available. When not in use, it will show as just a small device on your wall, barely noticeable, but it can be extended eight to ten feet with up to four or five lines on it. You simply use clothes pins to hang your clothes.

2) For smaller locations, like apartments or mobile homes, a tripod clothes hanger can be used. The wooden, metal or aluminum legs extend to form a tripod, allowing room for four to five lines about three feet long for hanging. Clothes pins, hangers, or draping clothes over the lines are appropriate.

3) If you are lucky enough to have a gas or electric indoor clothes dryer, it is essential to take good care of the dryer from the very beginning to prevent fires. After every load of clothes, it is essential to clean the vent from built up lint. About once a month, it should be washed with water to give it a thorough cleaning. Also about once a month, the crevice tool from the vacuum should be shoved down in the lint unit to clean out any lint that is catching there. In most home fires, the clothes dryer is often the main cause for the fire, so use much care, and take care.

When Do You Know That Your Refrigerator Compressor Is in For a Repair?

What can you say about the refrigerator? A ubiquitous sight in every household, it stands, unobtrusively, in one corner of the kitchen and goes about performing its duties day in and day out throughout the year. And that too, without much maintenance and care from the home owner in most cases. Sometimes it is also subjected to abuse-when in tearing hurry, we often yank open the refrigerator door, stuff in food or snatch out a bowl or two, and then slam the door shut. Indispensable it may be, but the refrigerator is still taken for granted.

Obvious Signs

Meanwhile, you can keep in mind and look out for some tell-tale signs that the compressor is malfunctioning. Ensure that you call only a BBB-accredited repair service provider to do the fixing job; this certification is a guarantee that you will be offered only the highest-grade service Appliance Repair Van Nuys.

Here are some glaring pointers that the compressor needs to be repaired:

* The refrigerator makes clicking noises. It may be that the compressor is working too much, becoming over-heated, and thus switching itself off as a precautionary measure and then restarting. It may also be that a loose bolt or a screw in the compressor start/stop switch is causing these noises. Whatever may be the reason, the wisest course of action is to call in a professional to take a look and fix the matter.

* The refrigerator is not cooling adequately. This is a definite sign that the compressor is wearing out and may break down any day. The wear and tear on a compressor is brought about by many factors, the primary amongst them being the component overheating repeatedly. As the compressor heats up, it generates acidic substances from the refrigerant, which in turn, wears out its parts. The efficacy of the compressor is thus lost-the freezer might still be cold but food items inside won’t be cooled adequately.

* The refrigerator is laden with frost. Excessive frost inside the freezer compartment or on the compressor head are certain signs of a faulty compressor that is unable to process the refrigerant. The root cause may also lie in too much or too little of refrigerant; in either case, the cooling mechanism fails to control the temperatures inside the refrigerator and the compressor thus cannot work as well. This is one problem that only a professional can analyze.

* The compressor makes loud noises. Compressors that are about to break down make a lot of noise. Sometimes these are buzzing or grinding sounds; other times, louder-than-usual running sounds may emanate from the refrigerator. When the compressor groans, moans, shrieks, or complains loudly, you can be sure that some mechanical component within it is faulty and about to break down. To keep your compressor and refrigerator in peak working order clean the coils once a year or as needed. Buy a coil cleaning brush from Home depot or any hardware and clean the coils. Sometimes you can not reach the coils with the brush and the coils must be blown out.

DIY Vs Professional Appliance Repair Services

Dishwashers are one of the delights of a modern kitchen. They help keep sinks clear of dirty dishes waiting to be washed, and counters free from the clutter of dish drying racks. However, a dishwasher is only a boon when it’s working correctly. If the machine is malfunctioning, a dishwasher can sometimes become more of a nuisance than a benefit. One of the most common issues that arises is a problem with a dishwasher’s heating element. Learn what some of the symptoms of heating element malfunctions are, and determine if you want to work to diagnose the issue DIY-style or with the aid of professional appliance installers and repair specialists.

The heating element of a dishwasher serves two primary functions Jennair Appliance Repair. Number one, it keeps the water coming into the dishwasher hot (note: it does not heat the water itself, but maintains the temperature of the hot water that is pumped into the dishwasher). Number two, it heats the air inside the dishwasher to speed up evaporation, and therefore drying time, during the drying cycle (if your dishwasher is equipped with this cycle). If there is a problem with the heating element, you will most likely notice it in connection with one of these two functions. If your dishes are not coming out of the dishwasher clean, for example, it’s highly possible that the water is not staying hot enough to optimize the machine’s cleaning power. You should check that you’re using the right kind of detergent and that the detergent cup is working properly, but if you are, then there could be a problem with the heating element. If your dishes are still wet and are fairly cool at the end of a drying cycle, that’s a clear sign that the heating element is on the fritz. If you’ve encountered either of these problems, the next step is to either test the heating element yourself, or call in a major appliance repair professional to look at it for you. While a skilled DIY-er can certainly test out a dishwasher heating element on his or her own, an appliance pro will have experience with all major brands, including GE, Maytag, KitchenAid, and Bosch dishwasher repair, and will be able to address your particular machine’s issues with ease.

Getting an appliance installation and repair expert to make the diagnosis of a faulty dishwasher heating element is a great option if you’re not experienced with home improvement work of this type. If you want to tackle the heating element issue on your own, though, the first thing to do is to disconnect the power to the dishwasher. Then, open the washer to locate where the element is on the dishwasher floor. It’s a thin, circular tube, and may be covered or exposed. If it’s covered, you may need to remove the lower dish rack in order to remove the cover. Next, find the metal terminals at each end of the element and make a mental note of where they reach down into the base of the dishwasher. Once you’ve done that, you need to access the actual wiring that connects to the element. Do this by removing the kickplate at the base of the washer (you may have to close the door to do this). Once the wiring is exposed, look to see where the element connects (remembering the location of the element terminals from before). Label those wires so that you can reconnect them correctly later, and then disconnect them from the element by grasping the slip-on connector–do not pull on the wires directly. You may need to use needlenose pliers to do this. Once the wires are free, use a multitester (also called a multimeter) to test continuity. Setting the tester to the ohms setting times one, you should get a reading between zero and infinity if things are working. If you get no movement or if the reading goes straight to zero, there’s a problem and you should replace the heating element. If you discover that you have a problem, you can either continue the DIY route, consulting your owner’s manual and other print or online resources if you’re comfortable with that, or you can get a professional to perform the actual dishwasher repairs.

When you’re experiencing issues with your dishwasher in terms of dishes getting clean or dry, chances are that there’s a problem with the heating element. When it comes to confirming this diagnosis, you can either have a professional appliance repair person perform the necessary tests and subsequent dishwasher repair work, or, if you’re an intrepid DIY fan, you can tackle it on your own to get your dishwasher back in full working order.

Get Your Home Running Again With Expert Appliance Repair Services

When home appliances break down, sometimes it seems like your whole life screeches to a halt. If this happens to you, take matters into your own hands and call your local repair company so you can get things rolling again.

From keeping us cool to cooking our food, home appliances help us meet all types of needs. Malfunctioning or broken appliances can cause discomfort, inconvenience, and even safety hazards, so getting the problem taken care of in a timely manner is essential. Whether you need a stove repair or some TLC for your refrigerator, appliance repair experts can help you out. And, if repair isn’t an option, they can also help you install a new machine.

While it is possible to survive without a refrigerator Washer Repair Los Angeles, washing machine, or oven, these are basic home appliances that most of us are accustomed to using on a regular basis. They save us time and energy and let us prioritize other activities, from spending time with our families to being more productive work-wise. If a machine in your home is making an ominous noise or isn’t delivering the performance you’re used to, don’t wait for the problem to become worse. Getting a washer or dryer repair, for example, done as soon as you notice an issue will ensure that you don’t damage the machine more by letting the problem fester and will let you get back to your normal routine and use of it as soon as possible.

Sadly, there are times when fixing a problem just won’t cut it. Maybe your fridge is so damaged that a refrigerator repair will only be a stop-gap measure, or your oven is so old that your repair professional doesn’t have the tools or materials to even fix it. In these cases, getting a new appliance is the best option, rather than deciding to keep pouring money into a problem that will keep happening, or going without an appliance that is central to your way of life. If you have to get a new appliance, your repair person will also be able to serve as an appliance installer to make sure that the new machine arrives and is integrated into your space in a safe, efficient manner.

Appliances are wonderful tools, but can wreak havoc when they stop working. If this happens to you, call your local appliance repair professional to get the expert advice, service and installation help appropriate to your situation.

How to Find a Good Appliance Repair Company

We so often take for granted our modern conveniences, like dishwashers and washers and driers, that we don’t know how much we depend on our appliances until one of them goes on the fritz. It’s in stressful times like these that you will want to know how to find a reliable appliance repair company.

So, how does one find quality Appliance Repair in Maytag Appliance Repair Los Angeles? The Yellow Pages or online directories will be filled with choices, which makes it all the more difficult. The first and easiest choice is to ask your neighbors or local friends whose opinions you can trust. If they say all the right things, like they were reasonably priced, seemed honest, did a great job in the actual repair, you may be on to something.

The aforementioned web directories can be invaluable as well. There are plenty of websites that allow users to write reviews on how their experience was with their chosen business.

After you’ve taken your first gander at a list of appliance repair options in Vancouver, WA, see which of your local businesses accept credit cards. While it may be tempting to do so, never assume that all of them will.

If the appliance repair company went to the relative trouble of being able to accept credit card payments, it’s a little reassuring that they are reputable. Not just that they went to the trouble of getting credit card acceptance approval, but they need to have satisfactory themselves to be approved.

Even if you prefer to avoid using a credit card, if you know you can pay the bill off at the end of the month, you can use your credit card as a bit of short-term insurance. That is, by using the credit card, if you are not satisfied with the work done, you can contact your credit card company and ask them to have the repair cost charged back to the merchant. While there are some hoops to jump through (namely in the form of paperwork) it is worth it knowing that you have ammunition if you feel you have been wronged.

You can even get reliable information from other companies, even ones that you have no prior relationship with. For example, real estate firms often have appliance repair companies on retainer, and they wouldn’t do so unless the company was reliable.

When you finally get to the point of contacting an appliance repair company, have a few specific questions ready to ask. First, ask them questions that relate to the cost of simple repairs. If they answer them without much hesitation, that’s a good sign. If they seem evasive, that may not mean you are dealing with a scammer, but it raises a flag.

Whirlpool Dryer Parts

Hello friend I see you must be looking for Whirlpool Dryer Parts. Well maybe this article you are now reading could help you? The first thing you must have to know is what exactly is the problem of your appliance machine. Is it not heating, tumbling or taking to long to dry. There is many different parts that could be bad or in need of repair.

Now before you is a list of different kind of dryer parts and the process of how they work or what problem they could cost your dryer from working in good condition.

Dryer Timer Parts: They have many different part numbers for specific dryer models. The dryer timer is exactly what the name says it calls for your electricity to run the rest of the dryer in heat or time measurements Dryer Repair Los Angeles.

Dryer Start Switch Parts: There is a few different kind but are mostly common on all dryer models. Start switch parts allow you to push the switch and open a bi-metal mechanism and free the electricity into the dryer parts to allow it to run. The switch sometimes gets stuck in the open position or gets stuck in the closed position.

Dryer belt Parts: There is only three different belts in this brand of dryers. The most common one to replace most is belt number 341241. The belt allows the drum to spin by getting the horse power from the motor and puts tension on the Idler Pulley. Usually is torn, ripped, busted or weathered.

Dryer Motor Parts: There is only two different kinds of motors one is a front mount which means the blower is facing the front, and the other motor is the rear mount which means the blower wheel is facing the back. These motors spins the drum, tumbling your clothes at a variable rate of speed. It is common for these motors to get hung up or go bad on the start/run winding.

Dryer Blower Wheel Parts: There is only two part numbers for these blower wheel parts to match the dryer motor. The blower wheel spins at the rate of the motor circulating the air to evenly dry your clothes. It is common for these to chip and break from debris in left in pockets of clothes, or get stripped on the motor shaft.

Dryer Idler Assembly Parts: Two types of idler pulleys but either or can be put on and still work. The idler puts tension on the belt allowing the belt to turn the drum. The idler is common to get burnt by the belt wear or hung up. Also the idler can be going bad and make a lot of chirping noise due to poor maintenance.

Dryer Roller Assembly Parts. Rollers come in two different types and must match up the part number. The rollers have a dimension difference and makes the drum sit differently. Dryer rollers make the drum move easier and provide support for easy tumbling. The rollers usually go bad by rounding out the bearing in the middle of the roller parts.

Dryer Thermostats, Safety switch Parts: There is many different temperatures and air flow ratios to match the thermostats and safety switches. The thermostats regulate the heat and cycle the heat temperatures. The safety’s monitor and control if the dryer is getting too hot or not enough air flow and will shut down the dryer down in till replaced. When they shut the dryer down there is another problem else where that have to be diagnosed and repaired or you will experience the problem again.